Retro Reindeer Stocking

After making my Retro Christmas Tree Skirt, I was inspired to update some of the other decor around the ‘ol house for Christmas. This picture from 2009 shows Biceps’ stocking in all of its ridiculous glory. His stocking is far left, Cowboy is in the center and mine is far right.

Notice the sheer enormity of his stocking? He believes it entitles him to more presents…
Not only does his stocking stretch as the weight increases, but the knit of the stocking allows you to see anything inside of it-thus you must wrap everything. After years of dealing with this silliness, something had to be done.


With the leftover material from my Retro Christmas Tree Skirt and the green light from Biceps, I decided to make us Retro Reindeer Stockings that were the proper size a stocking should be.
This is the man’s version of a Retro Reindeer Stocking….


And this is the lady’s version of a Retro Reindeer Stocking.


Here’s what you’ll need to make a pair of you very own Retro Christmas Stockings:

Felt-several different scrap colors that float your boat and enough to cut (4) pieces of approx 2’ stockings-8’ squared of total material
Hot glue gun
Scissors
Ric-rac or other desired embelishments
Card Stock or your favorite stencils


Trace a simple stocking shape onto the material and cut out four total pieces. Mine measured approximately 16” tall and 10” wide. With two right sides together, sew a seam around the stocking, 1/4” away from the edge and leaving the top open.


Cut a 7” loop of ric-rac. Turn the sewn stocking right side out. Fold the top down a 1/2”, turning it inside of the stocking. Insert the loop of ric-rac on the edge of the stocking and sew a 1/4” seam around the top of the stocking.


Use your favorite stencil, or draw a shape onto cardstock that your little heart desires. I chose a tree for each stocking and also a boy deer with antlers for Biceps and a girl deer sans-antlers for yours truly.
Cut out the shapes that your little heart desired on you felt scraps.


Hot glue your felt shapes onto your stocking. Add ric-rac on the toes, heels and the top of the stocking.


I gave a little ric-rac embellishment to each deer’s neck…


…and added a bow to my ‘girl’ deer.


And then, I hung my Retro Christmas Stockings up by the chimney with care, in hopes that Saint Nick can fit a ’66 Mustang in there.
Or a diamond tennis bracelet.
Or just some gum. I’m easy to please.

written by

for the entire world. Deal with it.
Related Posts

One Response to "Retro Reindeer Stocking"

  1. Potholes & Pantyhose | Christmas on the Cheap-Decor Ideas says:

    […] also made this Retro Christmas Stocking for […]

    Reply

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply to Potholes & Pantyhose | Christmas on the Cheap-Decor Ideas Cancel reply

Your email address will not be published. Required fields are marked *